How do I read my residential water meter?
 
Where to find your meter Low Flow Indicator
How to read your meter
Calculating your water usage
Converting HCF to gallons
Using your meter to find a leak

 

Where to find your meter

MeterWater meters can be installed in various locations. Typical locations include the basement, hall closet, or in a meter pit in your yard. They should be installed in a warm, dry place, protected from drafts and the cold. If you can not locate your meter, please contact us, and we will assist you.Meter Pad

A touch pad, located on the outside of your house or garage, is connected to your meter and allows our meter readers to read your meter without entering your house.

 

How to read your meter

Reading your water meter is similar to reading the odometer in your car. Read all the numbers from left to right. Do not include the numbers after the decimal point or the numbers with a black background. Submeters are read in the same way.
 

Calculating your water usage Meter Guage

To calculate your water usage, subtract the (P) previous meter reading from the (C) current meter reading. In the Meter 1 Example above, the water consumption was 3 hundred cubic feet. (Meter 1 Example: 900-897=3) In the Meter 2 Example above, the water consumption was 15 hundred cubic feet. (Meter 2 Example 6455- 6440=15) Click here to see what your water usage means in dollars and cents.
 

Converting HCF to gallons

For billing purposes, Winterport Water District measures water consumption in hundred cubic feet (HCF) every month. But you can easily calculate your usage in gallons.

There are 748 gallons in one hundred cubic feet.
Multiply the number of HCF by 748 gallons to determine the number of gallons used.

Meter 1 Example:

3 x 748 = 2,244 gallons

Meter 2 Example:

15 x 748 = 11,220 gallons


Using your meter to find a leak
Low Flow Indicator

Your water meter is an important conservation tool. In addition to providing you with information about how much water you are using, reading your meter can also help you detect leaks in your household plumbing.

  1. To check for a leak you must first turn off all faucets inside and outside your house. Be certain the toilet is not flushed and the automatic ice cube maker is not operating when performing this task.
     

  2. When the water is turned off, the low flow indicator should not move. Depending on the type of meter you have, the indicator is a black or red triangle.


 


Contents of this page courtesy of the
Portland Water District

 

CONTACT WWD | SEARCH | LINKS | LEGAL DISCLAIMER | SITE MAP | HOME